---
格式版本: 2
标题: "Effects of manufacturing tolerances on the performance of metamaterial microwave anti-reflection coatings"
原文链接: "https://arxiv.org/abs/2608.19176"
发布日期: "2026-08-19"
发布时间校准状态: "found"
发布时间需复核: "否"
发布时间来源: "rule:local:strict_original_body"
发布时间证据: "**\\[v1\\]** Wed, 19 Aug 2026 17:52:39 UTC (3,285 KB)"
发布时间校准原因: "规则确认唯一严格发布时间，来源 local:strict_original_body"
发布时间校准置信度: "high"
发布时间候选数量: 18
发布时间严格候选数量: 6
发布时间原页读取状态: "source template page reused from URL open"
发布时间未找到原因: ""
发布时间校准时间: "2026-08-20T15:30:17+08:00"
发布时间仲裁状态: "skipped"
发布时间仲裁尝试次数: 0
发布时间仲裁耗时毫秒: 0
发现时间: "2026-08-20T15:26:21+08:00"
入库时间: "2026-08-20T07:30:17.441Z"
来源平台: "arXiv 学术论文搜索"
搜索渠道: "source_template"
搜索词: "https://arxiv.org/search/?query=performance&searchtype=all"
匹配关键词:
  - "performance"
相关厂家:
  []
相关专家:
  []
内容类型: "网页"
抓取工具: "Free Fetch + Defuddle"
清洗工具: "Defuddle Markdown + Defuddle/Readability 正文提取"
原始附件:
  []
AI优质: "否"
AI打分: 5
AI分档: "非优质"
AI质检状态: "不通过"
AI打分理由: "内容为天体物理领域的超材料微波抗反射涂层论文，与超节点、AI Rack、机柜级AI基础设施完全无关。无任何相关技术、商业或部署信息。"
AI质检模型: "ali-deepseek-v4-flash"
AI质检时间: "2026-08-20T15:33:17+08:00"
AI主题相关性: 0
AI来源权威性: 5
AI新颖性: 0
AI技术细节: 0
AI商业部署信号: 0
AI完整性: 5
AI摘要: "研究人员利用全波建模，在塑料样品双侧界面的超材料微波减反射涂层中加入随机几何变化，以量化制造公差对涂层性能的影响。结果显示几何变异可能造成额外散射、引入本不存在的衍射极大值，并改变涂层随频率变化的透光率。"
AI摘要模型: "ali-deepseek-v4-flash"
AI摘要时间: "2026-09-07T03:18:40.301Z"
采集批次: "2026年8月20日14点19分32秒"
采集批次ID: "20260820-141932-079"
去重键: "https://arxiv.org/abs/2608.19176"
---

## Astrophysics > Instrumentation and Methods for Astrophysics

## Title:Effects of manufacturing tolerances on the performance of metamaterial microwave anti-reflection coatings

[View PDF](https://arxiv.org/pdf/2608.19176) [HTML (experimental)](https://arxiv.org/html/2608.19176v1)

> Abstract:Metamaterial anti-reflection coatings (ARC) are used in a variety of applications, including: lenses, filters, and absorbers. Typically, the design of a given ARC is done within an infinite medium approximation, which presupposes that every unit cell on the interface is identical. However, in realistic applications, the geometry of a given ARC usually has some degree of variability, be it due to the shape of the surface inherent to the application, like in a lens, or manufacturing tolerances. This variation may alter the performance of the optical element in unanticipated ways, by creating additional scattering, enabling diffractive maxima that would normally be absent and, most crucially, changing the transparency of the ARC as a function of frequency. In this work we utilize full-wave modeling of finite samples of plastic which are matched with free space using a metamaterial ARC on both of their interfaces. By adding a degree of randomness to the ARC geometry we attempt to characterize the extent to which a given variation affects the expected performance of an ARC.

| Comments: |  |
| --- | --- |
| Subjects: | Instrumentation and Methods for Astrophysics (astro-ph.IM); Optics (physics.optics) |
| Cite as: | [arXiv:2608.19176](https://arxiv.org/abs/2608.19176) \[astro-ph.IM\] |
|  | (or [arXiv:2608.19176v1](https://arxiv.org/abs/2608.19176v1) \[astro-ph.IM\] for this version) |
|  | [https://doi.org/10.48550/arXiv.2608.19176](https://doi.org/10.48550/arXiv.2608.19176) |

## Submission history

From: Rustam Balafendiev \[[view email](https://arxiv.org/show-email/47df9082/2608.19176)\]  
**\[v1\]** Wed, 19 Aug 2026 17:52:39 UTC (3,285 KB)

[Which authors of this paper are endorsers?](https://arxiv.org/auth/show-endorsers/2608.19176) | Disable MathJax ([What is MathJax?](https://info.arxiv.org/help/mathjax.html))