---
格式版本: 2
标题: "Multi-Sensor Edge Angle Detection for Performance Analysis in Ski Jumping"
原文链接: "https://arxiv.org/abs/2608.17448"
发布日期: "2026-08-18"
发布时间校准状态: "found"
发布时间需复核: "否"
发布时间来源: "rule:local:strict_original_body"
发布时间证据: "**\\[v1\\]** Tue, 18 Aug 2026 07:30:16 UTC (29,259 KB)"
发布时间校准原因: "规则确认唯一严格发布时间，来源 local:strict_original_body"
发布时间校准置信度: "high"
发布时间候选数量: 18
发布时间严格候选数量: 6
发布时间原页读取状态: "source template page reused from URL open"
发布时间未找到原因: ""
发布时间校准时间: "2026-08-20T15:39:25+08:00"
发布时间仲裁状态: "skipped"
发布时间仲裁尝试次数: 0
发布时间仲裁耗时毫秒: 0
发现时间: "2026-08-20T15:33:55+08:00"
入库时间: "2026-08-20T07:39:25.659Z"
来源平台: "arXiv 学术论文搜索"
搜索渠道: "source_template"
搜索词: "https://arxiv.org/search/?query=latency&searchtype=all"
匹配关键词:
  - "latency"
  - "performance"
相关厂家:
  []
相关专家:
  []
内容类型: "网页"
抓取工具: "Free Fetch + Defuddle"
清洗工具: "Defuddle Markdown + Defuddle/Readability 正文提取"
原始附件:
  []
AI优质: "否"
AI打分: 5
AI分档: "非优质"
AI质检状态: "不通过"
AI打分理由: "内容为滑雪跳跃传感检测论文，与超节点/AI Rack/机柜级AI基础设施完全无关，命中词latency仅为泛词。"
AI质检模型: "ali-deepseek-v4-flash"
AI质检时间: "2026-08-20T15:43:36+08:00"
AI主题相关性: 0
AI来源权威性: 5
AI新颖性: 0
AI技术细节: 0
AI商业部署信号: 0
AI完整性: 5
AI摘要: "该研究提出一套用于跳台滑雪表现分析的可穿戴多传感器系统，将两个超声ToF传感器和鞋内IMU集成在单只靴子中，在不改装滑雪板的情况下测量滑雪板边缘角度与靴子倾斜度。"
AI摘要模型: "ali-deepseek-v4-flash"
AI摘要时间: "2026-09-07T03:21:25.875Z"
采集批次: "2026年8月20日14点19分32秒"
采集批次ID: "20260820-141932-079"
去重键: "https://arxiv.org/abs/2608.17448"
---

## Electrical Engineering and Systems Science > Signal Processing

## Title:Multi-Sensor Edge Angle Detection for Performance Analysis in Ski Jumping

[View PDF](https://arxiv.org/pdf/2608.17448) [HTML (experimental)](https://arxiv.org/html/2608.17448v1)

> Abstract:In ski jumping, performance during the gliding phase depends on achieving an aerodynamic posture that maximizes the lift-to-drag ratio. In the V-style technique, the ski edge angle is a key determinant. Reducing the edge angle flattens the skis, increases their effective surface area, and improves aerodynamic lift, ultimately contributing to longer flight distances. Ski edge angles are biomechanically constrained by the limited range of ankle inversion. Current sensing solutions widely quantify these angles using multi-system approaches that combine sensor signals through geometric relations. Such configurations require instrumentation on both the boot and the ski, altering mass distribution, affecting balance during flight, and increasing system complexity. To overcome these limitations, this work presents a wearable sensing system that measures both boot inclination and ski edge angle without modifying the ski surface. Two ultrasonic Time of Flight (ToF) sensors and an in-shoe Inertial Measurement Unit (IMU) are integrated into a single boot-mounted unit. Edge angles are estimated by combining ultrasonic distance measurements with IMU data through geometric reconstruction of the boot-ski configuration. Laboratory experiments demonstrate an angle resolution of 0.4500°, a Mean Absolute Error (MAE) of 0.2640°, and a coefficient of determination exceeding 99\\% when compared with reference measurements, indicating strong linear agreement between the two modalities. The system achieves an end-to-end latency of 30.31 ms, enabling real-time feedback suitable for athlete training, while consuming 1.28 mW of power. With a total weight of only 18.6 g the proposed system enables unobtrusive measurement of ski edge angle and boot orientation.

| Subjects: | Signal Processing (eess.SP); Systems and Control (eess.SY) |
| --- | --- |
| Cite as: | [arXiv:2608.17448](https://arxiv.org/abs/2608.17448) \[eess.SP\] |
|  | (or [arXiv:2608.17448v1](https://arxiv.org/abs/2608.17448v1) \[eess.SP\] for this version) |
|  | [https://doi.org/10.48550/arXiv.2608.17448](https://doi.org/10.48550/arXiv.2608.17448) |
| Related DOI: | [https://doi.org/10.1109/JSEN.2026.3725626](https://doi.org/10.1109/JSEN.2026.3725626) |

## Submission history

From: Lukas Schulthess \[[view email](https://arxiv.org/show-email/eab3091c/2608.17448)\]  
**\[v1\]** Tue, 18 Aug 2026 07:30:16 UTC (29,259 KB)

[Which authors of this paper are endorsers?](https://arxiv.org/auth/show-endorsers/2608.17448) | Disable MathJax ([What is MathJax?](https://info.arxiv.org/help/mathjax.html))
