---
格式版本: 2
标题: "Multi-Tag Collision Recovery in UHF-RFID Using Self-Attention Decoding"
原文链接: "https://arxiv.org/abs/2608.17216"
发布日期: "2026-08-17"
发布时间校准状态: "found"
发布时间需复核: "否"
发布时间来源: "rule:local:strict_original_body"
发布时间证据: "**\\[v1\\]** Mon, 17 Aug 2026 23:59:46 UTC (5,699 KB)"
发布时间校准原因: "规则确认唯一严格发布时间，来源 local:strict_original_body"
发布时间校准置信度: "high"
发布时间候选数量: 18
发布时间严格候选数量: 6
发布时间原页读取状态: "source template page reused from URL open"
发布时间未找到原因: ""
发布时间校准时间: "2026-08-20T15:46:54+08:00"
发布时间仲裁状态: "skipped"
发布时间仲裁尝试次数: 0
发布时间仲裁耗时毫秒: 0
发现时间: "2026-08-20T15:43:02+08:00"
入库时间: "2026-08-20T07:46:54.421Z"
来源平台: "arXiv 学术论文搜索"
搜索渠道: "source_template"
搜索词: "https://arxiv.org/search/?query=throughput&searchtype=all"
匹配关键词:
  - "throughput"
  - "performance"
相关厂家:
  []
相关专家:
  []
内容类型: "网页"
抓取工具: "Free Fetch + Defuddle"
清洗工具: "Defuddle Markdown + Defuddle/Readability 正文提取"
原始附件:
  []
AI优质: "否"
AI打分: 8
AI分档: "非优质"
AI质检状态: "不通过"
AI打分理由: "论文主题为UHF-RFID标签碰撞恢复与吞吐优化，与超节点/AI Rack/机柜级AI基础设施完全无关，仅命中throughput关键词，属明显无关内容。"
AI质检模型: "ali-deepseek-v4-flash"
AI质检时间: "2026-08-20T15:52:21+08:00"
AI主题相关性: 0
AI来源权威性: 5
AI新颖性: 2
AI技术细节: 1
AI商业部署信号: 0
AI完整性: 0
AI摘要: "该文提出基于自注意力解码的SATR算法，用于UHF-RFID多标签碰撞恢复，直接处理基带I/Q样本并联合估计标签数量、解码各标签比特序列。"
AI摘要模型: "ali-deepseek-v4-flash"
AI摘要时间: "2026-09-07T03:24:53.151Z"
采集批次: "2026年8月20日14点19分32秒"
采集批次ID: "20260820-141932-079"
去重键: "https://arxiv.org/abs/2608.17216"
---

## Electrical Engineering and Systems Science > Signal Processing

## Title:Multi-Tag Collision Recovery in UHF-RFID Using Self-Attention Decoding

[View PDF](https://arxiv.org/pdf/2608.17216) [HTML (experimental)](https://arxiv.org/html/2608.17216v1)

> Abstract:Passive ultra high frequency (UHF) radio frequency identification (RFID) enables battery-free tags to communicate with a reader through backscatter. When multiple tags respond in the same time slot, their waveforms overlap at the reader, and a conventional reader that follows framed slotted ALOHA (FSA) discards the resulting collided slot. This limits the throughput of the overall protocol even though the received signal still contains recoverable information about the responding tags. To address this limitation, we propose Self-Attention Tag Recovery (SATR), a transformer-based decoding algorithm that operates directly on the baseband in-phase and quadrature (I/Q) samples received during a standard tag response. SATR uses self-attention to model the temporal structure of the modulated waveform and learns candidate tag representations. It jointly estimates the number of responding tags and, more importantly, decodes the bit sequence of each detected tag. We numerically evaluate the decoding and throughput performance of SATR over a range of collision sizes and recovery configurations, and validate it with measurements of commercial UHF-RFID tags. The results show that, with proper design and training, SATR can reliably decode collisions of up to four tags. It achieves a throughput of approximately $0.815$ tags per slot under single acknowledgment and $1.87$ tags per slot under full recovery, corresponding to $2.2$ and $5.1$ times the conventional FSA limit of $1/e \approx 0.368$ tags per slot, while approaching optimal decoding performance and outperforming existing collision recovery methods.

| Subjects: | Signal Processing (eess.SP) |
| --- | --- |
| Cite as: | [arXiv:2608.17216](https://arxiv.org/abs/2608.17216) \[eess.SP\] |
|  | (or [arXiv:2608.17216v1](https://arxiv.org/abs/2608.17216v1) \[eess.SP\] for this version) |
|  | [https://doi.org/10.48550/arXiv.2608.17216](https://doi.org/10.48550/arXiv.2608.17216) |

## Submission history

From: Talha Akyildiz \[[view email](https://arxiv.org/show-email/ebc2ac2f/2608.17216)\]  
**\[v1\]** Mon, 17 Aug 2026 23:59:46 UTC (5,699 KB)

[Which authors of this paper are endorsers?](https://arxiv.org/auth/show-endorsers/2608.17216) | Disable MathJax ([What is MathJax?](https://info.arxiv.org/help/mathjax.html))