---
格式版本: 2
标题: "TCAM for Autonomous Deformable Manipulation: The RMC2 Champion System for WBCD 2026 Track 4"
原文链接: "https://arxiv.org/abs/2608.10718"
发布日期: "2026-08-11"
发布时间校准状态: "found"
发布时间需复核: "否"
发布时间来源: "rule:local:strict_original_body"
发布时间证据: "**\\[v1\\]** Tue, 11 Aug 2026 09:35:39 UTC (2,092 KB)"
发布时间校准原因: "规则确认唯一严格发布时间，来源 local:strict_original_body"
发布时间校准置信度: "high"
发布时间候选数量: 18
发布时间严格候选数量: 6
发布时间原页读取状态: "source template page reused from URL open"
发布时间未找到原因: ""
发布时间校准时间: "2026-08-12T11:16:09+08:00"
发布时间仲裁状态: "skipped"
发布时间仲裁尝试次数: 0
发布时间仲裁耗时毫秒: 0
发现时间: "2026-08-12T11:13:54+08:00"
入库时间: "2026-08-12T03:16:09.953Z"
来源平台: "arXiv 学术论文搜索"
搜索渠道: "source_template"
搜索词: "https://arxiv.org/search/?query=deployment&searchtype=all"
匹配关键词:
  - "deployment"
相关厂家:
  []
相关专家:
  []
内容类型: "网页"
抓取工具: "Free Fetch + Defuddle"
清洗工具: "Defuddle Markdown + Defuddle/Readability 正文提取"
原始附件:
  []
AI优质: "否"
AI打分: 5
AI分档: "非优质"
AI质检状态: "不通过"
AI打分理由: "机器人变形操作论文，与超节点/AI Rack/机柜级AI基础设施完全无关，无技术细节或商业信号。"
AI质检模型: "ali-deepseek-v4-flash"
AI质检时间: "2026-08-12T11:16:20+08:00"
AI主题相关性: 0
AI来源权威性: 5
AI新颖性: 0
AI技术细节: 0
AI商业部署信号: 0
AI完整性: 0
采集批次: "2026年8月12日2点04分20秒"
采集批次ID: "20260812-020420-289"
去重键: "https://arxiv.org/abs/2608.10718"
---

## Computer Science > Robotics

## Title:TCAM for Autonomous Deformable Manipulation: The RMC2 Champion System for WBCD 2026 Track 4

Authors:[Guangrui Shen](https://arxiv.org/search/cs?searchtype=author&query=Shen,+G), [Zhili He](https://arxiv.org/search/cs?searchtype=author&query=He,+Z), [Shigang Wang](https://arxiv.org/search/cs?searchtype=author&query=Wang,+S), [Yuanjun Sun](https://arxiv.org/search/cs?searchtype=author&query=Sun,+Y), [Qing Yu](https://arxiv.org/search/cs?searchtype=author&query=Yu,+Q)

[View PDF](https://arxiv.org/pdf/2608.10718) [HTML (experimental)](https://arxiv.org/html/2608.10718v1)

> Abstract:This technical report describes the RMC2 Team's champion solution for the WBCD 2026 Track 4: Deformable Manipulation Challenge. The task requires a robot to pick a single T-shirt from a stack, load it onto a printing pallet, align the collar with a target area, and smooth the printing region, a sequence that involves single-layer separation, deformable transport, precise placement, and contact-rich surface adjustment. The competition strongly incentivizes fully autonomous execution, motivating the development of an autonomous solution. We built a fully autonomous system around the TCAM (TermiBrain Causal Action Model) framework, with the design principle that hardware, perception, data, and learning should jointly reduce the physical interaction complexity the policy must handle. A custom 3D-printed gripper designed for single-layer fabric separation improves picking reliability on a dual-arm ARX X5 platform. A wrist-centric four-camera setup pairs upper fisheye cameras for task-level context with lower RGB cameras for close-range gripper-cloth contact observation. We combine portable UMI-style demonstrations with real-robot demonstrations collected on the deployable platform to provide both broad manipulation priors and deployment-specific dynamics. TCAM ties these components into a closed loop: each trajectory is analyzed to identify the physical factors contributing to its outcome, driving targeted data recollection and policy fine-tuning. The policy outputs 30-step end-effector delta-pose action chunks from a multi-view VLA backbone. In the final competition, our system loaded 25 T-shirts at an average of approximately 23 seconds per attempt, with 22 achieving the required surface smoothness, securing first place in Track 4.

| Subjects: | Robotics (cs.RO) |
| --- | --- |
| Cite as: | [arXiv:2608.10718](https://arxiv.org/abs/2608.10718) \[cs.RO\] |
|  | (or [arXiv:2608.10718v1](https://arxiv.org/abs/2608.10718v1) \[cs.RO\] for this version) |
|  | [https://doi.org/10.48550/arXiv.2608.10718](https://doi.org/10.48550/arXiv.2608.10718) |

## Submission history

From: Guangrui Shen \[[view email](https://arxiv.org/show-email/09b89026/2608.10718)\]  
**\[v1\]** Tue, 11 Aug 2026 09:35:39 UTC (2,092 KB)

[Which authors of this paper are endorsers?](https://arxiv.org/auth/show-endorsers/2608.10718) | Disable MathJax ([What is MathJax?](https://info.arxiv.org/help/mathjax.html))